43.0
Page 1/6
Safety data sheet according to 1907/2006/EC, Article 31 Printing date 19.10.2016 *
Version number 8
Revision: 19.10.2016
SECTION 1: Identification of the substance/mixture and of the company/undertaking · 1.1 Product identifier · Trade name: INDUFLEX-MS (INDUFLEX-VK 6065) · 1.2 Relevant identified uses of the substance or mixture and uses advised against No further relevant information available. · Application of the substance / the mixture Spacings sealent · 1.3 Details of the supplier of the safety data sheet · Manufacturer/Supplier: SCHOMBURG GmbH & Co. KG Aquafinstr. 2-8 D-32760 Detmold Germany ---------------------------------------------Tel: ++49 (0)5231/953-00 Fax: ++49 (0)5231/953-123 email: info@schomburg.de web: www.schomburg.de · Informing department: Product Safety Department Tel: ++49 (0)5231/953-193 Fax: ++49 (0)5231/953-106 email: guido.herfort@schomburg.de
*
SECTION 2: Hazards identification · 2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008 The product is not classified according to the CLP regulation. · 2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 Void · Hazard pictograms Void · Signal word Void · Hazard statements Void · Additional information: Safety data sheet available on request. · 2.3 Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable.
SECTION 3: Composition/information on ingredients · 3.2 Chemical characterisation: Mixtures · Description: Hybrid Polymer Joint sealant · Dangerous components: 198028-14-7 Reactionproduct of Octadecanamid-12-Hydroxy-N-[2-[(1-oxodecyl) amino] ehtyl]- und N,N'-Ethan-1.2-dibylbis(12-hydroxyoctadecan-1-amid) und Decanamide, N,N'-1,2 EthandiylbisAquatic Chronic 3, H412 · Additional information For the wording of the listed hazard phrases refer to section 16.
2.5-10%
GB
(Contd. on page 2)
Page 2/6
Safety data sheet according to 1907/2006/EC, Article 31 Printing date 19.10.2016
Trade name: INDUFLEX-MS (INDUFLEX-VK 6065) (Contd. of page 1)
SECTION 4: First aid measures · 4.1 Description of first aid measures · General information Personal protection for the First Aider. · After inhalation Supply fresh air or oxygen; call for doctor. · After skin contact Wash with water and soap. · After eye contact Rinse opened eye for several minutes under running water. · After swallowing Drink copious amounts of water and provide fresh air. Instantly call for doctor. Show the pack or the label to the doctor. · 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. · 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. SECTION 5: Firefighting measures · 5.1 Extinguishing media · Suitable extinguishing agents CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam. · For safety reasons unsuitable extinguishing agents Water with a full water jet. · 5.2 Special hazards arising from the substance or mixture No further relevant information available. · 5.3 Advice for firefighters · Protective equipment: Wear self-contained breathing apparatus. · Additional information Follow the emergency-plan. SECTION 6: Accidental release measures · 6.1 Personal precautions, protective equipment and emergency procedures Bring persons out of danger. Wear protective equipment. Keep unprotected persons away. · 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. · 6.3 Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). · 6.4 Reference to other sections See Section 7 for information on safe handling See Section 8 for information on personal protection equipment. See Section 13 for information on disposal. SECTION 7: Handling and storage · 7.1 Precautions for safe handling Ensure good ventilation/exhaustion at the workplace. Keep away from children. · Information about protection against explosions and fires: No special measures required. · 7.2 Conditions for safe storage, including any incompatibilities · Storage · Requirements to be met by storerooms and containers: Store in cool location. · Information about storage in one common storage facility: Please follow the rules of the VCI-Storage-Concept for chemicals. · Further information about storage conditions: None. · 7.3 Specific end use(s) No further relevant information available. GB
(Contd. on page 3)
Page 3/6
Trade name: INDUFLEX-MS (INDUFLEX-VK 6065) (Contd. of page 2)
SECTION 8: Exposure controls/personal protection · Additional information about design of technical systems: It must be possible to wash the skin in the working area. Eye-wash bottle must be available. · 8.1 Control parameters · Components with critical values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. · Additional information: The lists that were valid during the compilation were used as basis. · 8.2 Exposure controls · Personal protective equipment · General protective and hygienic measures The usual precautionary measures should be adhered to in handling the chemicals. Instantly remove any soiled and impregnated garments. Avoid contact with eyes and skin. Change clothes which heavy contaminate with the product. · Breathing equipment: Not required. · Protection of hands: Hand Protection: Nitril-rubber-latex-gloves. · Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Butyl rubber II R: Thickness ≥ 0,5mm; Break through time ≥ 480 min · Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: Safety glasses · Body protection: Protective work clothing.
SECTION 9: Physical and chemical properties · 9.1 Information on basic physical and chemical properties · General Information · Appearance: Form: Viscous Colour: Black · Smell: Light · Change in condition Melting point/Melting range: Not determined Boiling point/Boiling range: Not determined · Flash point:
> 150 °C
· Ignition temperature:
300 °C
· Self-inflammability:
Product is not selfigniting.
· Danger of explosion:
Product is not explosive.
· Steam pressure:
< 0.1 hPa (20°)
· Density at 20 °C
1.34 g/cm³
· Solubility in / Miscibility with Water: Not miscible or difficult to mix (Contd. on page 4) GB
Page 4/6
Trade name: INDUFLEX-MS (INDUFLEX-VK 6065) (Contd. of page 3)
· 9.2 Other information
No further relevant information available.
SECTION 10: Stability and reactivity · 10.1 Reactivity No further relevant information available. · 10.2 Chemical stability · Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · 10.3 Possibility of hazardous reactions No dangerous reactions known · 10.4 Conditions to avoid No further relevant information available. · 10.5 Incompatible materials: No further relevant information available. · 10.6 Hazardous decomposition products: No dangerous decomposition products known SECTION 11: Toxicological information · 11.1 Information on toxicological effects · Acute toxicity Based on available data, the classification criteria are not met. · LD/LC50 values that are relevant for classification: 198028-14-7 Reactionproduct of Octadecanamid-12-Hydroxy-N-[2-[(1-oxodecyl) amino]ehtyl]und N,N'-Ethan-1.2-dibylbis(12-hydroxyoctadecan-1-amid) und Decanamide, N,N'-1,2 EthandiylbisOral LD50 > 2000 mg/kg (rats) Dermal LD50 > 2000 mg/kg (rats) Inhalative LC50/4 h 5.1 mg/l (rats) · Primary irritant effect: No irritant action known. · Skin corrosion/irritation Based on available data, the classification criteria are not met. · Serious eye damage/irritation Based on available data, the classification criteria are not met. · Respiratory or skin sensitisation Based on available data, the classification criteria are not met. · CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) · Germ cell mutagenicity Based on available data, the classification criteria are not met. · Carcinogenicity Based on available data, the classification criteria are not met. · Reproductive toxicity Based on available data, the classification criteria are not met. · STOT-single exposure Based on available data, the classification criteria are not met. · STOT-repeated exposure Based on available data, the classification criteria are not met. · Aspiration hazard Based on available data, the classification criteria are not met. SECTION 12: Ecological information · 12.1 Toxicity · Aquatic toxicity: 198028-14-7 Reactionproduct of Octadecanamid-12-Hydroxy-N-[2-[(1-oxodecyl) amino]ehtyl]und N,N'-Ethan-1.2-dibylbis(12-hydroxyoctadecan-1-amid) und Decanamide, N,N'-1,2 EthandiylbisEC/LC50 (48h) 94.9 mg/l (Daphnia sp.) · 12.2 Persistence and degradability No further relevant information available. · 12.3 Bioaccumulative potential No further relevant information available. · 12.4 Mobility in soil No further relevant information available. · Additional ecological information: · General notes: Water hazard class 1 (Self-assessment): slightly hazardous for water. Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system. · 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. (Contd. on page 5) GB
Page 5/6
Trade name: INDUFLEX-MS (INDUFLEX-VK 6065) (Contd. of page 4)
· vPvB: Not applicable. · 12.6 Other adverse effects No further relevant information available. SECTION 13: Disposal considerations · 13.1 Waste treatment methods · Recommendation Transfer to a permitted waste diposal institution. · European waste catalogue 08 00 00 WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) OF COATINGS (PAINTS, VARNISHES AND VITREOUS ENAMELS), ADHESIVES, SEALANTS AND PRINTING INKS 08 04 00 wastes from MFSU of adhesives and sealants (including waterproofing products) 08 04 10 waste adhesives and sealants other than those mentioned in 08 04 09 · Uncleaned packagings: · Recommendation: Disposal must be made according to official regulations. *
SECTION 14: Transport information · 14.1 UN-Number · ADR, ADN, IMDG, IATA
Void
· 14.2 UN proper shipping name · ADR, ADN, IMDG, IATA
· 14.3 Transport hazard class(es) · ADR, ADN, IMDG, IATA · Class
· 14.4 Packing group · ADR, IMDG, IATA
· 14.5 Environmental hazards: · Marine pollutant:
No
· 14.6 Special precautions for user
Not applicable.
· 14.7 Transport in bulk according to Annex II of Marpol and the IBC Code Not applicable. · Transport/Additional information:
Not dangerous according to the above specifications.
· UN "Model Regulation":
SECTION 15: Regulatory information · 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · National regulations · Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water. · 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. *
SECTION 16: Other information These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. (Contd. on page 6) GB
Page 6/6
Trade name: INDUFLEX-MS (INDUFLEX-VK 6065) (Contd. of page 5)
· Relevant phrases H412 Harmful to aquatic life with long lasting effects. · Department issuing data specification sheet: Environment protection department. · Contact: Mr. Guido Herfort · Abbreviations and acronyms: ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative Aquatic Chronic 3: Hazardous to the aquatic environment - long-term aquatic hazard – Category 3
· * Data compared to the previous version altered. GB