Technical Datasheet ASODUR®-EMB Epoxy resin mortar
Material number
Contents
Unit of quantity
Packaging
Colour
205790005
8
KG
Combination packs
Grey
205790007
20
Product features SR-B2,0-AR0,5-IR20 in accordance with DIN EN 13813 Two component Solvent free
Advantages Highly wear resistant High bending tensile and compressive strength Watertight up to 3 bar (from 20mm layer thickness)
Areas of application For producing coved fillets For the repair of cement-based substrates For filling voids For layer thicknesses of von 5 mm bis 50 mm For interior and exterior use
Existing test certificates Impact resistance testing DIN EN ISO 6272-1:11:2011 Wear resistance test per BCA
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/4
27/07/2023
Technical Datasheet ASODUR®-EMB Technical Data Material properties Product components Base material Consistency Dichte, verarbeitungsfertiges Produkt (ISO 1183-1) Flexural strength Compressive strength Watertightness (DIN EN 12390-8) Classification of the reaction to fire in accordance with DIN EN 13501-1
2 component system Epoxy resin Mortar-like approx. 2 g/cm³ approx. 50 N/mm² approx. 100 N/mm² Up to 3 bar, from 20 mm layer thickness Efl
Mixing Mix ratio, component A Mix ratio, component B Mixing time
100 weight proportion 3.6 weight proportion approx. 3 minutes
Application Substrate temperature Pot life Consumption pro m² and mm layer thickness Minimum reaction temperature Mixing method, machines, tools
Foot traffic after Application temperature Overcoat after Hardening time / full resilience Minimum layer thickness
from 10 °C to 30 °C approx. 60 minutes approx. 2 kg min. 10 °C Drill with stirrer Forced paddle mixer Standard Collormix stirrer Mk 140 HF Collomix stirrer XM 2-G50 approx. 12 hours from 10 °C to 30 °C approx. 12 hours approx. 7 days ≥ 5 mm
Application technology Aids/tools Stirrer (approx. 300 rpm) Forced paddle mixer Flat trowel Collomix stirrer CX60 Collomix stirrer XM 2 - G50
Manual processing Distributable with a flat trowel
Substrate preparation Requirement for substrate 1. 2. 3. 4. 5. 6.
Load-bearing Firm Grippy Dry Free of adhesion inhibiting substances Protected from moisture penetration from the rear
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/4
Technical Datasheet ASODUR®-EMB Substrate quality class
Usage Mixing 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
The (ideal) material temperature during the mixing procedure is +15 °C. Use a forced paddle mixer for larger coatings. Mix the resin homogeneously in the original container. Add the hardener to the resin. The hardener must run completely out of the container. Mix thoroughly with the mixer until a homogeneous consistency. The hardener must be distributed evenly. The mixing time is ca. 3 minutes. Decant the mass into a clean bucket. Stir meticulously again.
Application 1. 2. 3. 4. 5.
For priming the surface, roller apply ASODUR®-GBM in a single application step. Apply ASODUR®-EMB while still wet to the primed surface and spread. Use ASODUR®-EMB while still wet to form the primed fillet area using trowel techniques. To repair damaged areas and voids, fill ASODUR®-EMB into the still fresh primer coat of ASODUR®-GBM with a trowel. Re-compact ASODUR®-EMB by rubbing down, e.g. with a flat trowel.
Cleaning tools Immediately after use, clean tools with ASO-R001.
Storage conditions Storage Store in a frost-free, cool and dry place. At min. 10 - 25 °C for 18 months in the original canister. Promptly use opened canister.
Disposal Hardened product leftovers can be disposed of in accordance with disposal code AVV 15 01 06.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 3/4
Technical Datasheet ASODUR®-EMB Notes The indicated consumption quantities are calculated values without additions for textured surface roughness and absorbency, level compensation, and residual material in the canister. We always recommend a calculated safety addition of 10% on top of the calculated consumption quantities. Higher temperatures shorten the pot life. Lower temperatures increase the application and hardening times. The rate at which material is consumed also increases at lower temperatures. The bonding between the individual layers can be strongly disrupted between the individual application steps due to the effects of dampness and contamination. Coating work requires a substrate temperature of at least 3 °C above the dew point temperature. If longer waiting times arise between the individual application steps or surfaces that have already been treated with liquid resin are coated again after an extended waiting time, the old surface must be well cleaned and thoroughly ground. Then apply a complete pore-free new coating. Arrange for proper ventilation during the drying and hardening phases. Protect from the effects of dirt and moisture during the curing phase. Observe the technical data sheets of the products mentioned before starting work. Applications that have not been clearly mentioned in this technical data sheet may only be carried out after the technical service department of SCHOMBURG GmbH has been consulted, and after the said department has approved of such a course of action in writing. For detailed information on application, read and observe supplementary technical information no. 19 "Applying ASODUR products".
The recognised standards of construction engineering, the relevant guidelines and current regulations must be observed. Observe applicable safety data sheet! GISCODE: RE 30 Annotations Conformity / Declaration / Verification
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 4/4